Ultrasonic Hardness Tester Manufacturer UCI-330 manufacturer from China Guangdong Yuelian Instruments Co., Ltd.

Product Detail

Model No.: UCI-330

Production Capacity: 100 sets/month

Delivery Date: 30-40 days

Operating Voltage: DC 4.2V

Net Weight: 500g

Min thickness of test material: 2mm

Length: 200mm

Means of Transport: Ocean,Land,Air

Packing: Plywood case

Loading Force: 2Kgf

Instrument Dimensions: 160*80*31mm

Loading force: 10/20/50/98N

Oscillating Rod Diameter: 3.7mm

Diameter: 46mm

There are kinds of methods for hardness measurement, commonly used like Brinell, Rockwell, Vickers, Leeb.

Specifications

Product Name	Ultrasonic Hardness Tester
Model	UCI-330
Loading Force	2Kgf(Optional: 1Kgf, 5Kgf, 10Kgf)
Measuring Range	HV:50~1599; HRC:20~76 HB:76~650;HRB:41~105; HRA:60~86; Mpa 255~2180
Measuring Accuracy	HV:±3%HV; HRC:±1.5HRC; HB:±3%HB
Indenter	136°Vickers Diamond Indenter
Measuring Direction	Support 360°
Data Storage	To save 2000-groups of measuring data and 20-groups of calibration data
Hardness Scale	HV,HB,HRC,HRA,HRB,MPa
Data display	Loading force,Testing-times, Testing result, Average, Maximum,Minimum,Deviation and Conversion scale.
Hardness Indication	LCD display
Operating Environment	Temperature:-10℃~50℃; Humidity: 30%~80%R.H
Operating Voltage	DC 4.2V
Instrument Dimensions	1608031mm
Net Weight	Approximate 500g(Without probe)

Standard Delivery

Manual Probe Specifications

Probe Type	U-10	U-20	U-50	U-100
Remark	Optional	Standard	Optional	Optional
Loading force	10N	20N	50N	98N
Diameter	22mm	22mm	22mm	22mm
Length	154mm	154mm	154mm	154mm
Oscillating Rod Diameter	2.4mm	2.4mm	3mm	3mm
Roughness of measuring surface	Ra<3.2um	Ra<5um	Ra<10um	Ra<15um
Min weight of test material	0.3kg	0.3kg	0.3kg	0.3kg
Min thickness of test material	2mm	2mm	2mm	2mm

Motorized Probe Specifications:

Probe Type	A-1	A-3	A-5	A-8
Remark	Optional	Optional	Optional	Optional
Loading force	1N	3N	5N	8N
Diameter	46mm	46mm	46mm	46mm
Length	200mm	200mm	200mm	200mm
Oscillating Rod Diameter	3.7mm	3.7mm	3.7mm	3.7mm
Min weight of test material	0.3kg	0.3kg	0.3kg	0.3kg
Min thickness of test material	2mm	2mm	2mm	2mm

Guidelines for selection and use of UCI instruments

Load	Model	Features	Product Application
98N	Standard length (manual)	Relatively large indentation; requires minimal surface preparation	Small forgings, cast material, weld inspection, HAZ
50N	Standard length (manual) Extended length (manual) Short probe (manual)	For general use 30 mm extended length Reduced length (90 mm); electronics in separate housing	Induction hardened or carburized machine parts, for example, camshafts, turbine weld inspection, HAZ Measurement in grooves, on gear tooth flanks and roots Turbine blades, inside wall of pipes with Ø >90 mm
10N	Standard length (manual) Extended length (manual) Short probe (manual)	Load is easy to apply and provides control to test onsharp radii 30 mm extended length Reduced length (90 mm); electronics in separate housing	Ion-nitrided stamping dies and molds, forms, presses, thin walled parts Bearings, tooth flanks Turbine blades, inside wall of pipes with Ø >90 mm
8N	Motor probe style	Load is applied by servomotor	Finished precision parts, gears, bearing raceways
3N	Motor probe style	Load is applied by servomotor; rather small indentations	Thin layers, for example, copper or chromium on steel cylinders; Copper rotogravure cylinders; Coatings, case hardened parts
1N	Motor probe style	Load is applied by servomotor; rather small indentations	Thin layers and coatings

Block Specification